Designed to simultaneously fill and weigh valve bags with dry bulk products. Chantland-MHS offers gravity, pneumatic, auger and impeller type models utilizing balance (scale) beam and electronic load-cell technology to efficiently and accurately meter dry products such as powders, granular materials, chunks and pieces in a controllable, predictable fashion. We maximize packaging rates while maintaining repeatable, accurate weighing results.

Printable Data Sheet
Online Data Sheet

Product Image

The 1070 Series Impeller Filler is designed to fill valve style bags with high bulk density powder products such as Portland and masonry (plastic) cements, fine ground gypsum, hydrated lime, fly ash, fine ground calcium carbonate, talc, silica flours, insecticides, clay products, stucco containing fine sand only and similar products. The products can contain some sand, but it must not be greater than 150 mesh. Bulk densities should remain greater than 50 pounds per cubic foot.

Product Image

The 2010 Plug-Stack is designed to fill valve style bags with dry abrasive products that would normally cause excessive wear on packers that use a butterfly valve at the product inlet. Typical products include pellet, granular or powder products such as ready mix concrete and cement blends that include aggregate particles larger than sand.

Product Image

Model 4010 Rapid Flow Impeller Filler is designed to fill valve style bags with high bulk density powder products such as Portland and masonry (plastic) cements, fine ground gypsum, hydrated lime, fly ash, fine ground calcium carbonate, talc, silica flours, insecticides, clay products, stucco and similar products. The products can contain some sand, but it must not be greater than 150 mesh. Bulk densities should remain greater than 50 pounds per cubic foot.

Product Image

The 4189 Compaction Bagger is designed to fill valve type bags by volume rather than weight. Typical products include fibrous or compressible materials such as soils, sawdust, cellulose fiber

Product Image

The 4190 WeighMaster is designed to fill valve type bags with flaked, granular or powdered products such as spice blend flours, salted meat cures, mustard flours, chemical powders, grout blends, livestock supplements and similar materials.

Product Image

The 4199 Gravity PortaValve is designed to fill valve type bags with high density free flowing products such as steel shot and similar materials.

Product Image

The 4210 PowderMatic is designed to fill valve type bags with dry pelleted, flaked, granular and powdered products such as food flour blends, chemical powders and flakes, fertilizers, herbicides, cements, aggregates, paint powders, seeds, plastic resins and similar materials.

Product Image

The 4213 PressureMatic is designed to fill valve type bags with dry free-flowing granular products such as pelleted or prill fertilizers, granular herbicides, granular aggregates, seeds, plastic pellets and similar materials.

Product Image

The 4227 Valve Bag Placer is designed to automatically place valve bags onto the spout of a valve bag filler. This placer will handle most kraft paper bags and some poly bags.

Product Image

The 4400 Robotic Valve Bag Placer is designed to automatically place valve bags onto the spout of a valve bag filler. This placer will handle most kraft paper bags and some poly bags.

« Back